Co-Chair, Industry 4.0 Summit & Past-President IET, UK
Naomi ClimerCo-Chair, Industry 4.0 Summit & Past-President IET, UK
Naomi Climer is Trustee and Past President of the Institution of Engineering and Technology, Chair of the International Broadcasting Convention (IBC) Council and Chair of the UK Government (DCMS) Future Communications Challenge Group (FCCG) looking at the technology opportunities for the UK around 5G and the Internet of Things. Naomi also works as a consultant with the Board of Sony’s UK Technology Centre.
Naomi is an engineer, her career has been spent in the Broadcast and Communications technology industry including at the BBC, ITV and Sony both in Europe and the US.
Naomi is listed in the Daily Telegraph and Women’s Engineering Society 50 Most Influential Women in UK Engineering in 2016 and in Computer Weekly’s 50 Most Influential Women in UK IT 2015 and 2016.
In her spare time, Naomi is and a keen sailor, motorcyclist and all things outdoors.
Dr Graeme Philp
Co-Chair, Industry 4.0 Summit & Chief Executive, GAMBICA
Dr Graeme PhilpCo-Chair, Industry 4.0 Summit & Chief Executive, GAMBICA
After gaining his PhD in fibre-optic sensors in 1985 Dr Philp worked for ABB until 1991when he joined the intrinsic safety specialist, MTL, based in Luton UK. He became Managing Director in 1992 and then Chief Executive in 1995, a post which he retained until MTL was acquired by the US multinational, Cooper Industries in 2008. By that time, MTL had annual sales of over £100m and sold its products in 70 countries around the world. In December 2010 Dr Philp was appointed Chief Executive of GAMBICA, the UK trade body representing the instrumentation, control, automation and laboratory technology sectors of UK industry.
For more details on GAMBICA please visit www.gambica.org.uk
Schneider Electric, Zone President, UK & Ireland
Tanuja RanderySchneider Electric, Zone President, UK & Ireland
Tanuja Randery joined Schneider Electric in 2015 from BT Global Services, where she served as President, Strategy, Marketing & Transformation responsible for the growth transformation agenda. Prior to BT, Tanuja spent 10 years at Colt Group, in both strategy and operations roles – while at Colt she led the UK/IE Enterprise Business, was MD of Benelux and setup Colt’s Global Business division. Tanuja also led the acquisition of MarketPrizm – a low latency trading infrastructure company and was CEO of the entity driving the expansion into Asia and cross asset classes.
Tanuja’s professional career has also seen her working as Vice President of Strategy at EMC Corp where she led a number of key M&A initiatives and she worked seven years as a Consultant at McKinsey, specialising in technology and sales and marketing effectiveness, both in the United States.
For more information on Schneider Electric visit www.schneider-electric.com
Lord Prior of Brampton
Parliamentary Under Secretary of State at the Department for Business, Energy and Industrial Strategy
Lord Prior of BramptonParliamentary Under Secretary of State at the Department for Business, Energy and Industrial Strategy
Lord Prior of Brampton was appointed Parliamentary Under Secretary of State at the Department for Business, Energy and Industrial Strategy on 21 December 2016. Previously he served at the Department of Health as Minister for NHS Productivity from May 2015 until December 2016. He is a Conservative member of the House of Lords.
He graduated from Cambridge University with an Exhibition and MA in Law and subsequently qualified as a Barrister in 1976.
Lord Prior served as Member of Parliament for North Norfolk from 1997 to 2001 and went on to be deputy chairman and CEO of the Conservative Party. He was also on the Commons Select Committee for Trade and Industry.
Career outside politics
Lord Prior has held a number of jobs during his career including:
– Chairman of the Care Quality Commission from 2013 to 2015
– Chairman of the NHS Workforce Race Equality Standard Strategic Advisory Group
– Adviser to the health authority of Abu Dhabi
– Chairman of the Norfolk and Norwich University Hospital from 2002 to 2013
– Associate with Lehman Brothers and Lazard Freres
– Senior executive with British Steel
– Managing a number of private companies, mainly in manufacturing and engineering
As Parliamentary Under Secretary of State, his responsibilities include:
– Industrial strategy
– Lords lead on all BEIS issues
– Industrial policy (with the Minister of State for Climate Change and Industry)
– Professional services
– Rail supply chain
– Life sciences
– EU single market
– Deregulation and regulatory reform
– Land Registry
– Ordnance Survey
– Companies House
– Corporate minister
Vice President Research & Technology, Airbus Group, Germany
Jens GralfsVice President Research & Technology, Airbus Group, Germany
Jens Gralfs was appointed in January 2013 as Airbus Operations Architect for the Overall Physical Design. He is in charge of all Research & Technology activities in this field, managing the transnational activities for system structure and cabin. His team develops solutions for new aircraft programs as well as new ideas for all running programs in Airbus.
Before taking over this role, he was in charge of manufacturing engineering for all assembly and installation processes in Airbus for 5 years, leading the transnational manufacturing engineering team for all assembly/installation activities at Airbus, covering all ten assembly plants across Europe.
Jens Gralfs began his professional career in 1992 in Airbus as project leader for automation systems. After several positions he became R&D Manager for the Airbus plant Stade, where he was in charge of coordinating all R&D activities (mainly Carbon Fiber Composite techniques). In 2001 Jens Gralfs became Head of New Technologies/New Programmes. In this role he was responsible to guarantee the technological innovation of composites products and their suitability in terms of technical solutions. Furthermore he defined the strategy for new product manufacturing and assembly processes, tooling concepts and technological solutions; being applied in the development and realisation for the A380/ A400M/ A350.
Managing Director, ABB, UK
Ian FunnellManaging Director, ABB, UK
Ian Funnell is a graduate of Aberdeen University in Engineering Science. He is a Fellow of the Institution of Engineering & Technology, a Fellow of the Institute of Directors and a member of the World Economic Forum Taskforce for Infrastructure Investment.
Mr Funnell has had a long and distinguished career in the global energy sector. He started in the UK utility sector, joining ABB originally in 1999, in manufacturing, utility and global oil & gas sectors. He rejoined the UK utilities in 2008 as the Director of Major Projects, and latterly as the Managing Director of Scottish Hydro Electric Transmission plc. Ian rejoined ABB in November 2012 in France as Group Vice President in the global utility sector and latterly as CEO and President of ABB SA (France). Ian was appointed Managing Director of ABB in the UK in January 2015.
For more information on ABB please click here.
CEO of TechUK
Julian DavidCEO of TechUK
Julian David is the CEO of TechUK. He was appointed as the Director General of Intellect in March 2012 and led its transformation to TechUK in November 2013.
Julian has spent over 30 years in the technology industry mostly working for IBM in various roles including Vice President for Small and Medium Business in UK, Ireland, Netherlands and Africa and then for five years as Vice President for Public Sector in UK, Ireland and South Africa.
After leaving IBM Julian worked as a consultant with companies large and small in the technology industry and then focused on helping SMEs establish successful operations in the UK primarily in the areas of local government and health.
Julian leads TechUK’s 60 strong team in representing more than 900 member companies, including multi-nationals and more than 500 SMEs to ensure that the digital tech industry is at the heart of a modern society and economy in Britain.
Julian is also the Vice President of the National Trade Associations at Digital Europe the association for digital technology companies in Europe and represents TechUK at WITSA the World IT and Services Association. He is a trustee of the Tech Partnership which works to promote careers and skill development in the ICT Industry.
For more details on TechUK visit www.techuk.org
Chief Technology Officer, Siemens, UK
Alan NorburyChief Technology Officer, Siemens, UK
Alan Norbury is the Central Technology Officer for Siemens industrial activities – a leading global supplier of industrial plant and software, manufacturing automation and drive technologies to industrial customers across the UK and Ireland.
Alan started his career as an Apprentice in Siemens Congleton in 1978 moving into the role of Technical Specialist where he specialised in automation and low voltage products. In 1998 Alan spent time in Germany acting as Global Account Manager for key accounts such as Philip Morris & ICI.
He later became the UK Product Specialist for a number of advanced technologies, developing into the role of Applications Specialist primarily focussing on the UK OEM market. Alan setup a team of Application Specialists in 1997, a team of pre-sales technical consultants located around the UK and Ireland who advise customers on the best use of Siemens technologies.
Alan spent the past two years working closely with High Value Catapult Centres, particularly the Manufacturing Technology Centre in Coventry and more recently the AMRC Sheffield. He is now Siemens Central Technology Officer, and dedicates his time to developing leading technology innovation which seeks to benefit Siemens UK manufacturing facilities and also Siemens industrial customers.
For more information on Siemens UK please visit http://www.siemens.co.uk
Deputy Secretary General, European Trade Union Confederation, Belgium
Peter ScherrerDeputy Secretary General, European Trade Union Confederation, Belgium
Peter Scherrer was elected as ETUC Deputy Secretary General at the Paris Congress in 2015 having, previously worked for the German Metalworkers’ Trade Union (IG Metall) in Frankfurt, where he held the post of European Industrial Policy officer.
Before that, he spent three years (2011-2014) as Labour Director with ArcelorMittal Bremen, and was General Secretary of the European Metalworkers’ Federation (EMF) from 2005-2011.
Peter was born in Clarholz, Westphalia in Germany. He started his working life at the age of 14 as an apprentice metalworker, and was later employed as a welder, truck driver and postman. During the 1980s, he studied history, social sciences and journalism in Germany and the UK, obtaining a Master’s degree in history from the University of Bielefeld in 1989.
From 1990 onwards, Peter held a number of trade union and NGO positions in Germany and the Balkans. From 1998-2002 he was Editor-in-Chief of the South-East Europe Review for Labour and Social Affairs (SEER).
For more more information on the ETUC visit www.etuc.org
Prof. Dr. Egbert-Jan Sol
CTO of TNO & Director Smart Industry, Netherlands
Prof. Dr. Egbert-Jan SolCTO of TNO & Director Smart Industry, Netherlands
Professor Dr. Egbert-Jan Sol, is both the CTO of TNO Industry, and Director of the Netherlands Smart Industry program. He is also part-time Professor at the science faculty of the Radboud University in Nijmegen. At European level he is vice-chairman of EFFRA, the European Factories of the Future Research Association, and member of it’s high level group on manufacturing.
Professor Sol (MSc and Phd Mechanical Engineering) started his industrial career as a robotics system architect, followed by a career as a software project manager, development manager (Philips) and then Managing Director of 500 people at the Ericsson R&D Centre. From 1990-98 he was part-time Professor of Technology Management at the Eindhoven University of Technology (TU).
“It is easy to make technology complex, it is very difficult to make technology simple. Yet in manufacturing only the simplest solution works.”
Managing Director, B&R Automation, UK
Alan ConnManaging Director, B&R Automation, UK
Alan Conn is the Managing Director UK & Ireland for B&R Automation, a global leader in industrial automation.
He joined B&R in August 2016 from Bosch Rexroth Ltd, where he worked for 9 years in various sales management positions supporting OEM, End-User and distribution businesses in the UK & Ireland. Since April 2012, Alan had been the National Sales Manager for the Factory Automation Business Unit covering Electric Drive & Controls, Linear Motion, Assembly Technologies and Hydraulics Technologies.
He is married with two children and lives in Northamptonshire and is based at the B&R UK Headquarters in Peterborough.
For more information on B&R Automation visit www.br-automation.com
Head of Department for ICT, Industrial & Nano Technologies and Space - Austrian Federal Ministry of Transport, Innovation and Technology (BMVIT)
Michael WiesmullerHead of Department for ICT, Industrial & Nano Technologies and Space - Austrian Federal Ministry of Transport, Innovation and Technology (BMVIT)
Mr. Wiesmüller’s holds a degree in Philosophy of Science, and worked several years as a Humanities Scientist and then as a Management Consultant with A.T. Kearney. He joined the Federal Ministry of Transport, Innovation and Technology (BMVIT) in the late 1990s.
He is currently Head of Department for ICT, Industrial & Nano Technologies and Space. Main responsibility of this department covers the design of Innovation Policies for High-Tech-Industries, national R&D strategies and programs in these domains, and all areas of International R&D Policy and Coordination. Among others he acts as Austrian Delegate to the European ICT-Program, as Governance Board Member of the JTI’s ECSEL, as Director of the EUREKA Clusters. ITEA 3 and CATRENE and Austrian Lead Delegate to the Key Enabling Technologies. He represents Austria in various Mirror-Groups of European Technology Platforms and in several European Policy Coordination Initiatives.
Mr. Wiesmüller has also represented Austria at the following –
- Austrian Representative, Governance Board ARTEMIS, ENIAC and ECSEL
- Austrian IT-Director, ITEA2/CATRENE
- Austrian Representative, AAL-Initiative
- Austrian Member, Future Internet Forum
Business Development & Strategic Product Manager, Bosch Rexroth, UK
Andy MinturnBusiness Development & Strategic Product Manager, Bosch Rexroth, UK
With 25 years in engineering, Andrew Minturn started his career at the Rover Group as an engineering toolmaker, working within the factory environment, manufacturing car body presses and tooling for jig assembly.
As a skilled engineer he undertook his ONC & HNC Qualifications in Mechanical Engineering and went on to achieve a 1st class degree in Engineering Systems, studying themes of automation, control, PLCs, hydraulics & pneumatic and robotics. He began working at Bosch Rexroth in 2002, developing his knowledge in assembly technology products. With a vast amount of experience, Andrew has a detailed understanding of a number of industries, including Aerospace, Automotive, General Automation, Food & Packaging, Electrical/Electronics and Medical, making him the ideal candidate for his current position as Business Development and Strategic Product Management.
His role now involves working in all the fields listed above, especially aerospace, developing Bosch Rexroth’s business strategy and products alike. Specialising in assembly technologies, he also plays a significant role in implementing Industry 4.0 across the UK. He continues to assist Bosch Rexroth’s Catapult Centre Strategy to be at the cutting edge of new developments, new processes and technologies.
For more information on Bosch Rexroth visit www.boschrexroth.com
Head of Operations Practice, McKinsey & Co., UK
Colin ShawHead of Operations Practice, McKinsey & Co., UK
Since Colin joined McKinsey (more than a decade ago), he has been 100 percent dedicated to the strategy development and execution of transformation programmes. Colin is a leading thinker in the field of transformational change and he works across multiple industrial and public sectors. Colin works closely with transformation leaders as a personal counsellor, ensuring their change programmes are properly developed, aligned, communicated, signed off, resourced, executed and that the benefits are captured.
Due to the scale and the transformation programmes that Colin works on, and to ensure that benefits are sustained, he always oversees the development of a change resource within each of his clients. Across all of his programmes, Colin has built the capabilities of over 500 change leaders.
Within McKinsey, Colin leads approximately 100 Operations-dedicated experts and specialists that cover all operations disciplines. Colin’s team is about 10 percent of McKinsey’s global operations practice population. Whilst the team are based in the UK they generally work across the whole of Western Europe.
For more information on McKinsey & Co and visit www.mckinsey.com
CTO Industrial Internet Consortium, USA
Stephen MellorCTO Industrial Internet Consortium, USA
Stephen Mellor is the Chief Technical Officer for the Industrial Internet Consortium, where he directs the standards requirements and technology & security priorities for the Industrial Internet. In that role, he coordinates the activities of the several engineering, architecture, security and testbed working groups and teams. He also co-chairs both the Definitions, Taxonomy and Reference Architecture workgroup and the Use Cases workgroup for the NIST CPS PWG (National Institute for Standards and Technology Cyberphysical System Public Working Group).
He is a well-known technology consultant on methods for the construction of real-time and embedded systems, a signatory to the Agile Manifesto, and adjunct professor at the Australian National University in Canberra, ACT, Australia. Stephen is the author of Structured Development for Real-Time Systems, Object Lifecycles, Executable UML, and MDA Distilled.
Until recently, he was Chief Scientist of the Embedded Software Division at Mentor Graphics, and founder and past president of Project Technology, Inc., before its acquisition. He participated in multiple UML/modeling-related activities at the Object Management Group (OMG), and was a member of the OMG Architecture Board, which is the final technical gateway for all OMG standards. Stephen was the Chairman of the Advisory Board to IEEE Software for ten years and a two-time Guest Editor of the magazine, most recently for an issue on Model-Driven Development.
For more details on the Industrial Internet Consortium visit www.iiconsortium.org
CEO, DELMIA, Dassault Systemes, France
Guillaume VendrouxCEO, DELMIA, Dassault Systemes, France
Guillaume joined Dassault Systèmes in 2016 and leads the DELMIA brand, DS’s industrial solutions portfolio. Before joining Dassault Systèmes, he spent 10 years at Alstom Transport, where he was VP Industrial from 2010 to 2016. Before that, he held several leadership positions in engineering and R&D at Alstom Transport, Valeo Electrical Systems and Aerospatiale. He has a PhD in Aeronautics from the California Institute of Technology.
Director Global Partner Sales, TDM Systems, Germany
Robert AuerDirector Global Partner Sales, TDM Systems, Germany
Robert Auer has spent over 20 years in the technology industry focusing on factory automation, communication and lifecycle management software. Robert is a graduate engineer (communications engineering) from the University of Applied Sciences (HTWG) in Constance (Germany) and holds a Master’s degree in international Business from the ESB Business School of the University in Reutlingen.
At TDM Systems Robert is currently focused on global Industry 4.0 and ”factory of the future” (smart factory) solutions. Prior to this he held roles in software development (engineering), project management, sales and marketing in the automation industry and has led and delivered diverse international IT projects (focusing on Smart factory (factory automation) and Lifecycle Management solutions). He is passionate about working on solutions for the factory of the future, the next generation IT solutions for global manufacturers.
In his current position as Manager Global Partner Sales he is responsible for the expansion of strategic partnerships within the Industry 4.0 philosophy of TDM systems, mainly focusing on Lifecycle Management, Machine Connections, CAM-Integrations and CIP.
For more information on TDM Systems please visit www.tdmsystems.com
Keith Ridgway CBE
Executive Chairman of the AMRC, University of Sheffield and AFRC, University of Strathclyde , UK
Keith Ridgway CBEExecutive Chairman of the AMRC, University of Sheffield and AFRC, University of Strathclyde , UK
Keith Ridgway is the Professor of Design and Manufacture and Executive Dean of the AMRC at the University of Sheffield. The AMRC comprises the AMRC with Boeing, the Nuclear AMRC and the AMRC Apprentice Training Centre. The AMRC with Boeing was established in 2001 to carry out research in manufacturing technologies directly related to the aerospace industry. In addition to Boeing, the AMRC has more than 80 sponsors, including Airbus, BAe Systems, Rolls-Royce, Messier Bugatti Dowty, Goodrich and Spirit Aviation. Application of the research developed has led to a step change in the manufacturing capability of many of the industrial sponsors and encouraged their on-going commitment and support.
The Nuclear AMRC was established in February 2010 and aims to increase the competitiveness of companies in the Nuclear New Build supply chain. Founding partners include EDF, Areva, Westinghouse, Rolls-Royce, Sheffield Forgemasters International and Tata Steel.
In 2010 the AMRC was awarded £20m from the Regional Growth Fund and the European Regional Development Fund to build a futuristic reconfigurable, digital factory incorporating Industry 4.0, “Factory 2050”. This opened in December 2015.
Professor Ridgway is also the Executive Chair of the Advanced Forming Research Centre at the University of Strathclyde where he is also the Professor of Manufacturing in the Dept of Design Manufacture and Engineering Management.
Professor Ridgway is a Fellow of the Royal Academy of Engineering, a Fellow of the Institution of Mechanical Engineers and a Fellow of the Royal Institute of Naval Architects. In 2012 he was awarded the prestigious Honorary Fellowship of the Royal Aeronautical Society. He was awarded the OBE for services to UK manufacturing industry in June 2005 and a CBE for services to Manufacturing Research In January 2012. Professor Ridgway has over 200 publications including over 80 journals articles.
For more information about the AMRC please visit www.amrc.co.uk
Chief Technology Officer, Cimlogic, UK
Steve WilkinsonChief Technology Officer, Cimlogic, UK
Steve Wilkinson is the Chief Technology Officer for Cimlogic, empowering some of the largest manufacturers in the world to become World Class Manufacturers, enabling the continual improvement of their production methodology.
Steve enables manufacturers to achieve objectives such as: improving supply chain visibility; improving efﬁciency; increasing quality; meeting regulatory compliance; improving product genealogy and traceability; reducing energy costs and becoming an enterprise wide ‘LEAN’ manufacturing operation. Steve is able to scale this technology, so that SMEs can also benefit from the Industry 4.0 technologies that are available and emerging.
Steve first began his career with Cimlogic 11 years ago as a Control Systems Engineer; in 2012, he moved into the role of Solutions Architect. Steve holds a BSc in Physics with Electronics and Instrumentation, and an MSc by Research – Digital Image Processing, both from Leeds University.
His role within Cimlogic, involves setting the technological roadmap for Cimlogic and its customers. Steve works within sectors such as Food and Beverage, Pharmaceutical, Automotive, Consumer Packaged Goods, Chemical and Petrochemical and Animal Nutrition.
For more information on Cimlogic visit www.cimlogic.co.uk
Chief Business Officer, K3 Syspro, UK
Cathie HallChief Business Officer, K3 Syspro, UK
Cathie Hall is Chief Business Officer of business solutions provider K3.
The K3 Syspro division, part of the K3 group, is a leading supplier of SYSPRO Enterprise Resource Planning solutions to the UK and Europe. Joining K3 6 years ago, Cathie brings to the company over 15 years’ experience working with business technology – including running her own consultancy and being a SYSPRO customer herself.
During this time Cathie worked closely with businesses in the manufacturing and distribution sectors to help them better leverage enterprise systems to servitize business models and deliver greater value to customers. During her time as MD of K3 Syspro, Cathie established the K3 Syspro skills academy and invested heavily in the company’s products and people.
For more details on K3 Syspro visit www.k3syspro.com
Mike Blackburn OBE
Chairman Greater Manchester LEP & Regional Director BT
Mike Blackburn OBEChairman Greater Manchester LEP & Regional Director BT
Mike lives in the North West and has been BT’s Regional Director for the region since 2007. This role leads the NW board and aims to put BT at the heart of local communities. The board works to better understand and respond to the needs of local people and business. This is done through strategic relationships with Local Authorities, key stakeholders, business and community organisations.
Mike is also chair of the Greater Manchester Local Enterprise Partnership. This is a board designed to support business and local authorities to grow the local economy, tackle major barriers to growth and develop shared strategies for the local economy to increase job creation.
Mike holds a number of other Non Exec or Trustee roles:
- Deputy Chairman of the North West Business Leadership Team.
- Trustee of the Lowry Theatre, Salford.
- Chair of governors at the Manchester Communication Academy in Harpurhey.
- Chair of governors at the Manchester Communication Primary Academy.
- Trustee of NYAS (National Youth Advocacy Service).
- North West advisory board member for Business in the Community. Mike was chosen as the Prince’s NW Regional Ambassador for 2010/11 and 2011/12.
- Board member of the Lancashire Enterprise Partnership.
Mike was awarded an OBE in the Queen’s Birthday Honours List in June 2015 for services to the economy in the North West. Mike is married with 3 children and lives in Cheshire.
For more information on Manchester LEP visit www.gmlep.com
Managing Director, FORCAM, UK
Andrew SteeleManaging Director, FORCAM, UK
Andrew Steele is leading the charge for increased productivity in the UK & Ireland. The manufacturing engineer has worked for notable UK engineering giants such as Rolls Royce, Meggitt and Smiths Group. Andrew has been responsible for managing many engineering and aerospace projects both in the UK and abroad. Thus, he is the perfect spearhead for the campaign to close the productivity gap to other G8 nations. Andrew Steele is a sought after speaker at manufacturing events as an expert for Industry 4 and manufacturing productivity.
FORCAM is rapidly growing in the UK & Ireland: Aside from projects in aerospace and automotive manufacturing, FORCAM is also expanding to the Irish medical device industry. Headed up from the Warwickshire office in Rugby, the UK office is responsible for operations and projects across the UK and Ireland, as well as the Netherlands, Australia, Malaysia and Scandinavia.
For further details go to www.forcam.com
Dr. Jens Nackmayr
Partner & Head of Operations Strategy, Roland Berger, UK
Dr. Jens NackmayrPartner & Head of Operations Strategy, Roland Berger, UK
Dr. Jens Nackmayr has been a Partner at Roland Berger in London since 2015. His work mainly focuses on holistic profitability programs, operational performance improvements, lean production, engineering excellence and innovation. He is a truly international consulting professional with four years of experience in Research and Development and more than 18 in strategy and operations consulting. His industry expertise areas include the global engineered products and services industry, such as Automotive, Aerospace and Defense, and Metals & Steel. Jens holds a Master’s degree and a PhD in Mechanical Engineering from the Technical University of Berlin.
His recent Roland Berger publication Operations Strategy – how to manoeuvre in times of technology-driven disruption illustrates the importance of competitive business models and value chains, leveraging digital enablers, automation and the concepts of Industry 4.0.
For more information on Roland Berger please visit https://www.rolandberger.com/en/
Sustainable Manufacturing Lead, The Knowledge Transfer Network
Ben PeaceSustainable Manufacturing Lead, The Knowledge Transfer Network
Ben is the Sustainable Manufacturing Lead at the “Knowledge Transfer Network” – the UK’s Innovation Network. He worked in industry for ten years in product development – first in a university spinout, and then in a multi-national heating conglomerate. He then spent a couple of years in innovation consultancy before joining the Knowledge Transfer Network (KTN) in 2011.
KTN’s mission is to stimulate innovation and join up the innovation landscape. With many thousands of members they do this by setting up effective collaborative partnerships and providing access to funding. In recent months Ben has been developing and delivering an SME outreach programme on 4th Industrial Revolution called “4Manufacturing”.
Find out more by visiting ktn-uk.org • You can also follow Ben on Twitter @BenPeace
Hans Michael Krause
Head of Sales – Processing & Packaging, Bosch Rexroth, Germany
Hans Michael KrauseHead of Sales – Processing & Packaging, Bosch Rexroth, Germany
Hans Michael Krause is the Head of Business Development Industry Sector Processing & Packaging at Bosch Rexroth AG in Lohr am Main, Germany. He has a degree in Electrical Engineering and Industrial Management and started his professional career in Argentina working as an independent automation engineer. Since 2007 he has been working with Bosch Rexroth’s machine building and FMCG customers and has recently been responsible for multiple Industry 4.0 projects.
For more information on Bosch Rexroth visit www.boschrexroth.com
Professor Sam Turner
Chief Technology Officer, High Value Manufacturing Catapult, UK
Professor Sam TurnerChief Technology Officer, High Value Manufacturing Catapult, UK
Professor Sam Turner is the Chief Technology Officer of the High Value Manufacturing (HVM) Catapult. He joined the HVM Catapult team from his role as CTO of the AMRC with Boeing, including the flagship digital facility Factory 2050, machining, casting and composite technology. As a founding member of the AMRC, Sam developed the AMRC’s Machining Group to its current level of 85 staff and £5M turnover, with successes in delivering impact to UK industry, before moving into the CTO role. In addition to his industrial work, Professor Turner has secured Innovate UK, EPSRC and EU funding for over £20M for manufacthring R&D in machining and automation. He has over 40 publications, including 16 journal papers in the area of machining. Sam is active in machining, automation and digital manufacturing and chairs the Digital Engineering and Manufacturing Leadership Group.
For more information on HVM Catapult visit https://hvm.catapult.org.uk/
Dr Jon Hague
VP Operations & Open Innovation, Unilever, UK
Dr Jon HagueVP Operations & Open Innovation, Unilever, UK
Since April 2016 Jon has been VP Operations & Open Innovation for Unilever Resarch & Development. This role involves driving change management throughout Unilever R&D, with focus on leading strategy development & Implementation for Unilever R&D, leading innovation excellence, pioneering new ways to create value in partnerships and R&D Performance and Efficiency and Data Excellence
Previously he led the Unilever Open Innovation Capability and drove the widespread adoption of open innovation and strategic partnership in Unilever R&D.
Jon holds a first degree in Materials Science and a PhD in Polymer Ion Complexes, awarded by the University of Sheffield in the UK. Jon joined Unilever in 1990 and spent the first seven years of his career as a research scientist in Hair Research at Port Sunlight Laboratory, UK. He has worked in Indonesia, launching a Regional Innovation Centre for Skin Cleansing and Care, and the US where Jon led the formulation group at the Global Technical Centre for Deodorants in Rolling Meadows, Illinois.
In 2006 Jon returned to the Port Sunlight Laboratory in the UK and operated as Strategy and Operations Director for Home and Personal Care R&D, later encompassing project managing the creation of a single global R&D organization in Unilever.
Jon is also currently Chair, Liverpool City Region Innovation Board, a position that brings together private sector, academic and local authority leaders to build and execute an innovation strategy for the City Region.
CEO & Co-Founder, Visual Factories, Israel
Matti TianoCEO & Co-Founder, Visual Factories, Israel
Using practical as well as deep business understanding of manufacturing operations and processes, Matti has led the development of an innovative manufacturing operations management approach, supported by cloud-based software and methods, called PIM (Performance Improvement Management).
An expert at measuring performance process improvement before and after implementation, Matti guides the delivery of accurate and measurable high-value outcomes for customers in a broad range of industries.
As CEO of Visual Factories, which provides out-of-the-box Industry 4.0 solutions, Matti focuses on empowering and expanding the PIM product value proposition, reducing barriers, and making innovative technologies and ideas accessible to his customers. In particular, Matti is skilled at linking present manufacturing needs and challenges to future technologies and methods that can lead to effective long-term solutions.
With over 15 years of experience selling technology to global manufacturers, Matti is a veteran of substantial process improvement projects who knows how to engineer ‘win-win’ situations for the benefit of all.
For more details on Visual Factories click here.
Managing Director, Spearhead Interacive, UK
Dan RileyManaging Director, Spearhead Interacive, UK
Dan Riley is the founder and Managing Director of Spearhead Interactive, a multi-award winning emerging technology agency and digital production studio based in North-East England. With more than a decade of experience working at the forefront of Virtual World and real-time rendering sectors across academia and the private sector, Dan has focussed on leveraging immersive and interactive solutions to solve commercial business challenges; and has grown Spearhead Interactive into a world leader in advanced data visualisation using 3D technologies.
Established in February 2013 the business has completed more than 70 projects for clients operating in more than sixteen sectors across the world, as far apart as Brazil and Singapore.
Aside from managing the growth of Spearhead Interactive, Dan’s remit also includes concept creation, user experience design, business development and conducting high level R&D into the core theory underpinning the technology; trend analysis, industry milestones, development pipelines, user psychology (game theory and immersion mechanics) and, in the case of Spearhead Virtual Reality solutions, user physiology.
Spearhead Interactive is best known for the range of innovative solutions created at the forefront of possibility, their focus on solving challenges for commercial clients, and their early investments in bleeding edge hardware; In turn enabling a world-class capability in creating interactive and immersive PC, mobile, augmented, virtual and mixed reality solutions, with additional capability for integration of smart sensors and IoT chips – taking immersive and interactive software past the visual and the functional and into the operational, with drastic implications for Industry 4.0, Smart Cities and Factories of the Future concepts.
For more information on Spearhead Interative click here.
Senior Manager Architecture & Software, Rockwell Automation, UK
Mike LoughranSenior Manager Architecture & Software, Rockwell Automation, UK
Mike Loughran has been working in the field of Manufacturing and Industrial Automation since graduating from Liverpool John Moores University with a B.Eng Hons Electrical & Electronic Engineering degree over 20 years ago. In this time he has worked with a many blue chip and SME companies in both manufacturing and infrastructure to help them streamline, automate and optimise their production environments. He has a passion for working with companies to help them shape the future of UK manufacturing for the better.
Throughout his career he has worked in a number of differing industries where he has helped them set out their automation strategy, how they can balance obsolesce versus innovation to unlock the potential of integration of new and existing technology to create a smart factory which can help to drive increased overall business profitability.
Mike is currently the UK & Ireland manager for Rockwell Automation Architecture and Software division.
For more information on Rockwell Automation visit http://www.rockwellautomation.com/en_UK
Managing Director, Weidmuller UK
Simon GoodwinManaging Director, Weidmuller UK
Simon Goodwin joined leading electronics and electrical connectivity company, Weidmüller UK, as its new Managing Director on December 1, 2015. He has overall responsibility for the provision of strategic leadership and overseeing all of Weidmuller’s activities in the UK and Ireland. In particular, he is focussed on developing business in the fields of industrial automation and solutions, factory automation and device manufacturing
Simon has a wealth of experience with previous successful management appointments at renowned global companies such as Omron Electronics, B+R Industrial Automation and IMO.
For further information on Weidmuller visit www.weidmueller.com
Manufacturing Manager, Accolade Wines, UK
Gil WoodwardManufacturing Manager, Accolade Wines, UK
Gil has been with Accolade Wines since Jan 2010 in a variety of local and global Continuous Improvement roles, and since 2014 as Manufacturing Manager. Gil was the architect for Accolade’s Lean Management System, which includes our bespoke policy deployment, ‘Review and Direction Setting’ and a successful apprenticeship programme using BIT. We have won Leadership and Strategy (2012) and World Class Manufacturing (2015) at The Manufacturer of the Year awards.
Gil is a GSK trained Lean Sigma Blackbelt and an Ambassador of TeachFirst. He’s an alumni of Bath University where he studied Chemistry and IOE UCL where he studied for a Masters in Teaching.
In this presentation Gil will explore how Accolade are using the new solutions now available to them as a result of Industry 4.0 to tackle the same old problems.
For more information on Accolade Wines visit www.accolade-wines.com
Product Marketing Manager, Industrial Networking, Balluff, UK
Russell SmithProduct Marketing Manager, Industrial Networking, Balluff, UK
As an I4.0 evangelist, Russell Smith is the Product Marketing Manager for Industrial Networking at Balluff Limited, a world leading supplier of industrial networking, sensing, RFID and vision to industrial customers across the UK. Russell’s mission is to ensure that UK manufacturers are able to leverage the significant benefits that digitalisation can provide.
Prior to taking up this role in 2015, he held the position of Automotive Industry Manager, working on a number of high profile powertrain projects with major car manufacturers, which have provided him with a solid foundation in both project and consultative solution sales.
Russell holds a Bachelor’s degree in Mechanical Engineering from the University of Leeds. Outside of work he is a keen cyclist, having competed in the BC Bike race, a 7-day MTB stage race across British Columbia. He also follows MotoGP and has a passion for driving cars and riding motorcycles.
For more informatin on Balluff visit www.balluff.com
Sector Manager Advanced Manufacturing, Liverpool LEP, UK
Simon ReidSector Manager Advanced Manufacturing, Liverpool LEP, UK
Simon Reid is Sector Manager for Advanced Manufacturing at the Liverpool City Region LEP. After graduating from London Metropolitan University in 1989 Simon returned to Liverpool to deliver Government funded training programs to the long term unemployed before starting a career at engineering and manufacturing recruitment company Kinetic plc in 1993. For the next 13 years Simon played a pivotal role in the company’s growth which was predicated on delivering on site provision to manufacturers in the automotive, aerospace, pharmaceutical, FMCG and food and drink sectors. Simon held the role of Service Director with a portfolio of OEM and large Tier 1 companies throughout the UK including Airbus, Kimberley Clark, Arla Foods and Ford. Simon set up a new permanent recruitment wing of the business specialising in senior and executive positions in manufacturing before joining rival Beresford Blake Thomas in 2008 to add manufacturing and engineering to their existing portfolio.
Simon joined The Mersey Partnership (TMP) in 2010 as an Investor Development Manager working with foreign owned companies in the Liverpool City Region helping them to attract additional investment and internationally mobile projects. Following a stint as SuperPORT manager for TMP Simon then joined Peel Ports as the Commercial Manager for bulk liquid products for the Port of Liverpool and Manchester Ship Canal, account managing international companies like Shell, Cargill, Ineos and Essar. In 2014 Simon joined the LEP to head up Advanced Manufacturing and working with the Advanced Manufacturing board to deliver economic growth in this critical sector.
Simon was instrumental in devising, developing and implementing “LCR 4.0” – a European funded program to deliver Industry 4.0 technologies to 300 SMEs across the Liverpool City Region.
For more information on advanced manufacturing at Liverpool LEP visit ww.liverpoollep.org
Dr Christos Emmanouilidis
Senior Lecturer IOT & Analytics, Cranfield University, UK
Dr Christos EmmanouilidisSenior Lecturer IOT & Analytics, Cranfield University, UK
Dr Christos Emmanouilidis is a Senior Lecturer on Internet of Things and Analytics, within the Through-Life Engineering Services Institute in the School of Aerospace, Transport and Manufacturing, Cranfield University, UK.
He is a Senior IEEE Member, a Founding Fellow of the International Society of Engineering Asset Management (ISEAM), a member of IFIP WG5.7 ‘Advances in Production Management Systems’ and is currently serving as Secretary of the IFIP TC5.1 WG A-MEST on Advanced Maintenance Engineering Services and Technologies.
He has had past appointments in Industry (Zenon SA Automation Technologies), and Public Research Organisations (ATHENA Research & Innovation Centre) and has acted as Research & Innovation expert adviser for Regional Government and the EU. He has 20 years of experience on Research, Development and Innovation projects and his current research is in the area of Industrial Informatics, employing Context-Aware Computing, Data Analytics, as well as Cyber-Physical Systems and Internet of Things Technologies to serve applications needs in Asset Lifecycle & Maintenance Management.
For more details on Cranfield University visit www.cranfield.ac.uk
Chairman & CTO, ATS Global B.V., Netherlands
Mike JamesChairman & CTO, ATS Global B.V., Netherlands
Mike James FCMA, GCMA, MBA, is Chairman & CTO of ATS International B.V., a global, independent solution provider of manufacturing operations management/manufacturing execution systems, automation, quality and IT solutions. Mike is also President of the Manufacturing Operations Management Institute.
The Internet of Things, The Fourth Industrial Revolution, Smart Manufacturing and the creation of new manufacturing strategies is his current passion.
Mike completed his financial and business education at Southampton and Bournemouth Universities in the UK. His career in manufacturing started at Plessey Electronics followed by Poole Pottery, Allen-Bradley CNC in the UK and Allen-Bradley Europa B.V. in The Netherlands.
At Indivers N.V. Mike was responsible for the establishment of aerospace manufacturing units in The Netherlands and the expansion of semi-conductor manufacturing facilities. Mike is co-founder of ATS in 1986 which is now a global company.
As Chairman of MESA’s Global Education Program from 2009 to 2012 and Chairman of MESA EMEA from 2010-2013 Mike moved to become President of MOMi, the Manufacturing Operations Management Institute to continue developing MOM education with MESA for the benefit of the manufacturing industry. In August 2016 Mike was appointed Chair of MESA International. MESA is a global, non-profit organizations for manufacturers.
For more information on ATS Global visit www.ats-global.com
Senior Solution Consultant Mitsubishi Electric Europe, Germany
Thomas LantermannSenior Solution Consultant Mitsubishi Electric Europe, Germany
Thomas Lantermann has been working for Mitsubishi Electric Europe B.V for more than 25 years. During this time, he has been responsible for project management, product marketing, technical project management and software development for different product groups in the field of Factory Automation from PLC to EDM machinery.
Because of his widespread knowledge in factory automation and IT security, he is a welcome participant of panel discussions and forums dealing with technologies and trends related to the connection of IT within the automation world. He is member of several ZVEI, VDMA working groups in the area of Industrie 4.0.
In his current position as Senior Solution Consultant FA EMEA he is responsible for the expansion of strategic partnerships within the e-F@ctory Alliance, mainly focusing on Industrie 4.0, Industrie 4.0 security and other approaches like the Industrial Internet Consortium and the Japanese Robot Revolution Initiative.
For more information on Mitsibushi Electric Europe please follow this link https://eu3a.mitsubishielectric.com/
CEO, Valuechain, UK
Tom DawesCEO, Valuechain, UK
Tom has founded several aerospace manufacturing and technology businesses around the world and he understands first-hand about the challenges of running manufacturing SMEs and the importance of converting data into intelligence through smart technology. Combining his industrial experience (good and bad) with PhD research in supply chain collaboration and intelligence, Tom has a clear vision of how companies will connect and collaborate in the future as integrated valuechains.
Tom formed Valuechain Technology in 2010 to provide smart manufacturing software to build world class supply chains and has established a global client base (from Primes such as Bentley Motors, to aerospace micro SMEs in Bangalore) that all have a common goal of integrating their businesses and supply chains to create integrated, innovative and intelligent value chains. Tom has secured a €3.2m H2020 project from European Commission to make his PhD supply chain research a reality and is living the dream!
For more details on Valuechain visit www.valuechain.com
Managing Director, Brainboxes, UK
Luke WalshManaging Director, Brainboxes, UK
Luke is Managing Director of Brainboxes Ltd, a Liverpool based designer and manufacturer of data and I/O connectivity products. Brainboxes’ mission is to realise the fourth industrial revolution for companies, no matter what their size.
Brainboxes has been designing and manufacturing in their Merseyside headquarters for over 30 years. They now have offices in America and Japan and work with some of the biggest names in IT and industry. Brainboxes technology marries the robust hardware of industry with the possibilities of modern software and connectivity. The wide variety of customers and industries Brainboxes supplies is indicative of the massive potential for industry 4.0 technology to change our world beyond manufacturing.
Prior to joining Brainboxes, Luke achieved a Masters in Electronic Engineering from York, was awarded a Kauffman scholarship, and started his own business winning HSBC’s Young Entrepreneur of the year.
Luke’s personal passion for software and technology is driving the company’s focus forward and helping their customers embrace Industry 4.0.
For more information on Brainboxes visit www.brainboxes.com
UK&I Territory Account Manager, Industrial Automation, Panduit Europe, UK
Andrew ShawUK&I Territory Account Manager, Industrial Automation, Panduit Europe, UK
Andrew Shaw is a Territory Account Manager with over 25 years’ experience in the Telecommunications and Data Networking industry. Andrew has been with Panduit for 15 months having previously held several management roles with Cisco over a 12-year tenure, most recently where he was responsible for Partner Enablement across their Emerging Markets territory. Prior to Cisco, Andrew held positions with GeoTel, Avaya and a major UK banking group. In his current role he is responsible for assisting customers and channel partners with the latest details of the Panduit Physical Infrastructure Solutions in Industrial Automation.
For more information on Panduit visit www.panduit.com
Head of Application & Sales Support, Murrelektronik GmbH
Wolfgang WiedmannHead of Application & Sales Support, Murrelektronik GmbH
Wolfgang Wiedemann joined leading industrial electronics manufacturer, Murrelektronik in 2012 as a Global Sales Consultant. Wolfgang began his career in the field of manufacturing and industrial automation 23 years ago, as a skilled engineer and Head of the Electrical Department in a Machine Tools Factory. Since then, his vast experience has spanned the electro, pneumatic and fluid handling industries. Today, he is Head of the Application and Sales Support Department, based at Murrelektronik’s Global Headquarters in Oppenweiller, Germany. He is an expert in his field when it comes to writing PLC programmes, planning cabinet configurations and optimized installation concepts. Wolfgang’ s main area of expertise lies in safety, machine set up and PLC programming. His Machine Building knowledge is second to none and he is delighted to be attending the Open Technology Forum to share and learn with others.
For more information on Murrelektronik visit www.murrelektronik.co.uk
Head of Resource Portfolio, Development Directorate, Innovate UK
Zoe WebsterHead of Resource Portfolio, Development Directorate, Innovate UK
Zoë is Innovate UK’s Head of Resource Portfolio within the Development Directorate and looks to maximise impact from all our funding programmes. Until recently, Zoë lead the High Value Manufacturing team. Zoë joined Innovate UK in Jul 2007 as the Technologist for the Information and Communication Technology (ICT) area and became a Lead Technologist in Sep 2008. She wrote the UK innovation strategy for ICT which was launched in Oct 2008, drawing on her wide consultation with numerous stakeholders from business, academia and the public sector. In 2011, Zoë became Head of Technology, leading a team of Lead Technologists covering Advanced Materials, Biosciences, Electronics, Sensors and Photonics and ICT. Together they wrote the UK innovation strategy for Enabling Technologies for 2012-15.
Zoë graduated from the University of York in 1999 with a BEng degree in Computer Science. As part of that course, she undertook a year-long sandwich placement at Marconi Communications where she spent time working within software development, testing and strategy teams. Zoë then went on to graduate from the University of Sussex in 2000 with an MSc in Intelligent Systems. Zoë joined the DERA in September 2000 as a research scientist in the Distributed Technology Group working primarily in the area of artificial intelligence. In July 2001, QinetiQ was formed from part of DERA and, along with the majority of other DERA employees, Zoë joined QinetiQ. In 2004, Zoë was promoted to Senior Research Scientist. While at QinetiQ, Zoë was appointed technical lead on several MoD-funded research projects, some of which she instigated and took through the proposal process. She completed a PhD between 2002-2005 in the area of personalised information prioritisation. Zoë left QinetiQ in December 2006 to join SEA in Somerset as a Consultant in Intelligent Systems. As well as being the main author of a System Requirements Document for a complex information system, Zoë conducted research under the International Technology Alliance Program (co-funded by the US DoD and UK MoD), working alongside researchers in UK business and US academia.
Zoe is a Chartered Engineer through the IET.
Wonderware UK and Ireland Product Manager, SolutionsPT
Andy GrahamWonderware UK and Ireland Product Manager, SolutionsPT
As the Wonderware Product Manager for the UK and Ireland, Andy is responsible for the roll-out of Wonderware information and operations management solutions to the UK manufacturing and infrastructure community. Andy is focussed on developing digitisation strategy within an evolving ‘everything connected’ industrial landscape, bringing a pragmatic approach to managing increasing volumes of operational data to deliver meaningful and actionable insight.
Director, Darktrace, UK
Mariana PereiraDirector, Darktrace, UK
Mariana Pereira is an expert marketer having worked in senior roles across multiple geographies and industries including technology and consumer goods. At Darktrace, Mariana works closely with the marketing and technology teams, bringing machine learning application and cyber-threats stories to life. She holds a degree in Italian and Management Studies from University College London and an MBA from The University of Chicago Booth School of Business.
key figures from 2017
of attendees had purchasing authority of £100,000+
2017 sponsors and supporters